HC Aluminum is a professional aluminium sheet coil 1060 manufacturer, supplying reliable products for architectural decoration, electronics and appliances, chemical equipment, traffic signage, lighting reflectors, thermal insulation cladding, stamping, and general industrial manufacturing. Leveraging comprehensive production capabilities—including melting and casting, hot rolling, cold rolling, annealing, leveling, slitting, and surface treatment—we provide tailored solutions regarding alloy temper, thickness, width, and packaging to meet specific customer processing requirements, dimensional needs, and application environments.
1060 aluminum sheet coil possess relatively low strength, making them suitable for processing methods such as stamping, bending, deep drawing, spinning, embossing, laminating, anodizing, and coating. They can be processed into mirror-finish, brushed, embossed, color-coated, laminated, and anodized aluminum products. For applications such as lighting reflectors, traffic signs, decorative panels, kitchenware, heat sinks, and appliance housings, consistent flatness, surface cleanliness, and thickness precision are often more critical than simply pursuing high strength.
HC Aluminum supplies 1060 aluminum coils, sheets, circles, and strips. Standard coil thicknesses range from 0.20 mm to 6.00 mm, with widths spanning 20 mm to 2,000 mm; thicker 1060 aluminum sheets can be supplied to meet specific project requirements. Common widths include 1,000 mm, 1,220 mm, 1,250 mm, 1,500 mm, and 2,000 mm, with support available for non-standard slitting and cut-to-length services. Common supply tempers include:
O temper: Fully annealed; the material is soft with high elongation, making it suitable for deep drawing, stretching, spinning, and complex bending.
H12 and H14 tempers: Light to half-hard strain-hardened; these offer good formability combined with a certain level of rigidity.
H16 and H18 tempers: High hardness and strength; suitable for products requiring stiffness, flatness, and resistance to deformation.
H24 temper: Strain-hardened and stabilized; balances strength with workability, commonly used for decorative panels, signage, and general industrial sheet applications.
Taking 1060-H24 as an example, the tensile strength of the sheet is typically around 95–135 MPa, with a specified proof stress (yield strength) usually exceeding 75 MPa; for the 1060-O temper, tensile strength is typically around 60–100 MPa.
As a 1060 aluminum sheet coil manufacturer, HC Aluminum prioritizes process-wide control—from the composition of the molten aluminum and the quality of cast-rolled ingots to the properties of the finished coils. Production management focuses on parameters such as thickness and width tolerances, flatness, edge quality, coil tightness, surface oil residue, and color consistency. During the slitting process, parameters such as strip width, burr direction, coil inner and outer diameters, and individual coil weight can be adjusted to meet specific customer equipment requirements. Common inner core diameters include 150 mm, 300 mm, 405 mm, and 505 mm. Regarding surface finishes, we offer standard mill finish as well as value-added options such as protective film coating, embossing, mirror polishing, brushing, anodizing, and color coating.
HC Aluminum manufactures products in compliance with standards such as GB/T, ASTM, and EN, providing full documentation regarding chemical composition, mechanical properties, and dimensional inspection. Our export packaging utilizes moisture-proof paper, PE film, edge protectors, and wooden or steel pallets; we also incorporate desiccants and container moisture-control measures suited to ocean transit times to minimize the risk of moisture damage, oxidation, and edge damage during shipping. HC Aluminum provides product solutions matched to specific processing techniques and end-use applications, establishing a stable and efficient supply chain for 1060 aluminum sheet coils.